NAOBO is a flexible chassis mounting and adaption solution with cable strain relief to meet any kind of standard fiber connector (z.B. LC, SC, ST). With a cable tie it can be fixed to a rack. The breakout adapter can be mounted straight or angled.
Breakout-Adapter-Kit consisting of 1 NAOBO plastic housing, 1 counter nut, 1 90° rear shell, 1 PG-gland, 1 cable tie and 2 screws.
Chassis connector with black chromium plating, 4 solder contacts, 1 LC-Duplex feedthrough socket and 1 shell ground contact (for SMPTE cable shield), waterproof acc. to IP 65, front panel mount
The chassis connector acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. Colored sealings are included to identify the fiber mode.
Not compatible to SMPTE 344M standard. Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage.
Features & Benefits
•Suggested OEM equipment connector due to LC front compatibility
•Designed as feedthrough with automatic sealing shutter
•Shutter with silicone gasket protects optical connection from dust and dirt
•Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
•Accommodates standard LC connectors on the rear for simple installation
•Connection on the front side either by rugged opticalCON or standard LC connector
•The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
•Water resistant according to IP65 ingress protection in mated condition
•In case of limited space the chassis can be mounted without rubber gasket. IP rating for this is IP52.
•Color coded rubber sealing to identify fiber mode:
Multimode - black
Single mode PC - blue
Single mode APC - green
Reversible USB 3.0 gender changer (type A and B), Nickel D-housing
Reversible USB 3.0 gender changer (type A and B), Nickel D-housing
The NAUSB3 is a reversible USB 3.0 feed through adapter. The standardized D-shape housing of the adapter fits into conventional patch panels and offers an additional protection for the connector.
Features & Benefits
•USB 3.0 feedthrough adapter
•Reversible insert offering type A or B on front or rear end
•Standard D-shape housing
•Removable screen for chassis grounding
•Meets USB 3.0 specifications
USB 3.0 Performance
To meet the USB3.0 specifications the NAUSB3* chassis contain tight tolerance pin wiring and an improved ground connection due to an additional copper film between the USB jacks. As a result the feed through adapter guarantees permanent writing and reading speed > 200 MB/s.
Reversible USB 3.0 gender changer (type A and B), black D-housing
Reversible USB 3.0 gender changer (type A and B), black D-housing
The NAUSB3-B is a reversible USB 3.0 feed through adapter. The standardized D-shape housing of the adapter fits into conventional patch panels and offers an additional protection for the connector.
Features & Benefits
•USB 3.0 feedthrough adapter
•Reversible insert offering type A or B on front or rear end
•Standard D-shape housing
•Removable screen for chassis grounding
•Meets USB 3.0 specifications
USB 3.0 Performance
To meet the USB3.0 specifications the NAUSB3* chassis contain tight tolerance pin wiring and an improved ground connection due to an additional copper film between the USB jacks. As a result the feed through adapter guarantees permanent writing and reading speed > 200 MB/s.
Reversible USB 2.0 gender changer (type A and B), Nickel D-housing
Reversible USB 2.0 gender changer (type A and B), Nickel D-housing
Due to the rising digitisation the interface problems between audio/video networks, IT equipment, MP3 camcorders, etc. increase. A rugged solution is needed.
Neutrik's reversible USB gender changer, mounted in the standardized D-shape housing, and the rugged patch cables solve this problem.
Features & Benefits
•Ideal for audio networking and integration of computerbased equipment into audio systems
•Dust and water resistant acc. to IP65 safety standard in combination with NKUSB-*
•USB 2.0 gender changer type A-B (B-A)
•Reversible insert offering type A or B on front or rear end
•Universally accepted standard D-shape housing
•Removable screen to chassis grounding:
Reversible USB 2.0 gender changer (type A and B), black D-housing
Reversible USB 2.0 gender changer (type A and B), black D-housing
Due to the rising digitisation the interface problems between audio/video networks, IT equipment, MP3 camcorders, etc. increase. A rugged solution is needed.
Neutrik's reversible USB gender changer, mounted in the standardized D-shape housing, and the rugged patch cables solve this problem.
Features & Benefits
•Ideal for audio networking and integration of computerbased equipment into audio systems
•Dust and water resistant acc. to IP65 safety standard in combination with NKUSB-*
•Optional screen to chassis grounding
•USB 2.0 gender changer type A-B (B-A)
•Reversible insert offering type A or B on front or rear end
•Universally accepted standard D-shape housing
•Removable screen to chassis grounding:
