The TechLogix TL-6P-DB-O is a simple, cost-effective solution for terminating, adapting, and coupling fiber optic cables in the field. Its durable plastic construction makes it ideal for both indoor and outdoor applications, and its modular design accommodates up to six standard couplers or adapters for twelve total strands of fiber.
The TL-6P-DB-O supports both bulk and premade fiber optic cables and features a built-in fiber management system, providing cable strain-relief and protection.
Note: The compatible fiber optic adapters and couplers are sold separately. The TL-6P-DB-O supports universally sized panel-mount adapters.
TechLogix media converters adapt fiber signals to a variety of different formats and/or cable types.
The TL-MC-1S1R features one SFP port (SFP module sold separately) and one RJ45 twisted pair port, effectively adapting twisted pair-based devices to fiber for longer transmission distances. The MC-1S1R supports multimode fiber when paired with a multimode SFP module and single mode fiber when paired with a single mode SFP module.
Two TL-MC-1S1R media converters are required for most applications -- one for each end of the cable run.
Do you have intermittent signal dropouts? Did you accidentally let that patch cable hit the floor while dressing up your equipment rack? How good was that hamburger at lunch?
You might need to clean up the ends of your fiber before you install it into your gear.
The Fiber Optic Pen Cleaner for SC/ST/FC Ferrules is an innovative design of the traditional fiber end-face cleaner. It uses a special dust-free wire material with full contact cleaning ensuring different types of oil and debris will be cleaned with a single click. This pen cleaner can be used to clean SC, ST and FC connectors, including the female fiber ports.
The TechLogix TL-KSHEER is a professional-grade tool for preparing fiber optic cable for installation and termination. The KSHEERs aren't your grade-school scissors... they're designed to cut through the Kevlar and/or aramid yarn strength members found inside fiber optic cabling.
The KSHEERs are super sharp (watch your fingers), super pointy (don't run with them), and super strong (think superman). They're an essential tool for any fiber installer.
The TechLogix TL-3STRIP is a professional-grade tool for preparing fiber optic cable for connector termination. It features three precise holes for use with various types of fiber optic cable, including both multimode and single mode, from virtually any manufacturer.
The largest hole is ideal for stripping the 1.6 - 3mm fiber jacket down to the 600-900 micron buffer. The middle hole is ideal for stripping the 600-900 micron buffer down to the 250 micron coating. The smallest hole is ideal for stripping the 250 micron coating down to the 125 micron glass and/or polymer fiber.
The TL-3STRIP is an essential tool for any fiber installer.
The TechLogix TL-4P-DB-O is a simple, cost-effective solution for terminating, adapting, and coupling fiber optic cables in the field. Its durable plastic construction makes it ideal for both indoor and outdoor applications, and its modular design accommodates up to four standard couplers or adapters for eight total strands of fiber.
The TL-4P-DB-O supports both bulk and premade fiber optic cables and features a built-in fiber management system, providing cable strain-relief and protection.
Note: The compatible fiber optic adapters and couplers are sold separately. The TL-4P-DB-O supports universally sized panel-mount adapters.
TechLogix SFP and SFP+ transceiver modules adapt TechLogix fiber technology to different cable formats.
The TL-10GSFPP-MM300 transmits 10G signals up to 300 meters (984 feet) over duplex multimode fiber.
Look, everyone knows lasers are cool. You can blow holes in university statues or destroy homes with popcorn. If you fancy yourself a 'real genius' you can even use them to transport data! The best way to contain those beams into something really useful is to shoot them down a TechLogix Networx Fiber Optic patch cable.
The 50/125 micron OM4 multimode fiber optic cable is suitable for higher bandwidth applications, such as in data centers, telecom rooms, server farms, cloud storage networks, and any place fiber jumper cables are needed. It meets RoHS compliant and cable is optically tested for insertion loss to ensure high quality.
These armored fiber optic cables feature a built-in metal stainless steel tube to provide stronger protection of the optical fibers than standard fiber optic cables. The rugged armored cables allow optical fiber to be installed in the most hazardous areas, including environments with excessive dust, oil, gas, moisture, or even pesky rodents. Even though they are armored, a flexible 30mm bend radius and light-weight tubing makes them easy to install.
Look, everyone knows lasers are cool. You can blow holes in university statues or destroy homes with popcorn. If you fancy yourself a 'real genius' you can even use them to transport data! The best way to contain those beams into something really useful is to shoot them down a TechLogix Networx Fiber Optic patch cable.
The 50/125 micron OM4 multimode fiber optic cable is suitable for higher bandwidth applications, such as in data centers, telecom rooms, server farms, cloud storage networks, and any place fiber jumper cables are needed. It meets RoHS compliant and cable is optically tested for insertion loss to ensure high quality.
These armored fiber optic cables feature a built-in metal stainless steel tube to provide stronger protection of the optical fibers than standard fiber optic cables. The rugged armored cables allow optical fiber to be installed in the most hazardous areas, including environments with excessive dust, oil, gas, moisture, or even pesky rodents. Even though they are armored, a flexible 30mm bend radius and light-weight tubing makes them easy to install.